Sodeca CMTC centrifugal fan
Extremely robust open blade and single inlet centrifugal fans with sheet steel casing and impeller
Fan impeller mounted directly on the motor shaft.
Casing continuously welded from size 800 and up.
Class F motors with ball bearings and IP55 protection.
Please indicate in the quote form the model and other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials...).
Fan:
- With inspection and cleaning hatch from size 560 and up.
- Sheet steel casing.
- Forward curved impeller made of highly robust sheet steel, specially designed for air with a lot of dust and suspended materials.
- Casing continuously welded from size 800 and up.
- Fan impeller mounted directly on the motor shaft.
- Maximum temperature of air to be carried: -25 ºC +90 ºC.
Motor:
- Class F motors with ball bearings and IP55 protection.
- Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
- Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
- Working temperature: -25 ºC +50 ºC.
Finish:
Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
- Stainless steel fan.
- Special executions for temperatures + 300 ºC.
- Special windings for different voltages.
- Fan prepared to transport air up to +150 ºC.
- ATEX certified Category 2.
- Other arrangements like ARR.8.
