Sodeca CMTC-X Belt driven fan
Belt driven fans with open blade, equipped with an electric motor, a set of pulleys, belts and standardised guards
Class F motors with ball bearings and IP55 protection.
Motor mounted on pedestal with motor slide base.
Sheet steel casing.
Please indicate in the quote form the model and other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials...).
Fan:
- Motor mounted on pedestal with motor slide base.
- Forward curved impeller made of highly robust sheet steel, specially designed for air with a lot of dust and suspended materials.
- Sheet steel casing.
- Maximum temperature of air to be carried: -25 ºC +90 ºC.
- With inspection and cleaning hatch from size 560 and up.
- Casing continuously welded from size 800 and up.
Motor:
- Class F motors with ball bearings and IP55 protection.
- Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
- Working temperature: -25 ºC +50 ºC.
- Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
Finish:
Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
- Fan prepared to transport air up to +300 ºC.
- Special windings for different voltages.
- ATEX certified Category 2.
- Stainless steel fan.
