Sodeca WALL/DUCT Dynamic wall mount extractor fan

Please indicate in the quote form the model and other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials...).

Technical datasheet

Fan:

• Helicoidal casing support and fixing flange to allow easy wall anchorage and installation.
• Tubular casing in sheet steel with external terminal box.
• PL impellers manufactured in polyamide 6 re-inforced with fibreglass. AL impellers manufactured in cast aluminum. Models 40-2T, 45-2T, 100-4T-15, 100-4T-20 and 125 are only supplied in AL version.
• Airflow direction from motor to impeller.

Extruded aluminum hatch:

• An extremely robust structure that is able to withstand severe weather changes.
• Designed to ensure watertightness.
• Aluminum profile with thermal bridge break.
• Central ceiling and structure equipped with high performance thermal insulation.
• Thermal resistance of the assembly less than 0.89 W/m²·K.
• Position indicators in both positions (open and closed).
• Upper and lower opening mounting versions.
• Manual opening system.
• Airborne acoustic insulation value according to UNE-EN ISO 10140-2: Rw = 27 (0;-2) dB.

Motor:

• Class F motors with ball bearings and IP55 protection.
• IE3 efficiency motors.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +60 ºC.

Actuator:

• Reliability greater than 20,000 dual cycles.
• Supply voltage at 230 V AC 50/60 Hz.
• Working temperature: -25 ºC +60 ºC.
• Protection at the leading edge when closing the hatch.
• The stop in the closed position is regulated by an electronic limit switch.

Hatch finish:

• Anti-corrosive in extruded aluminum.
• RAL 7024M supplied as standard. Any other RAL can be supplied on demand.

On request:

• AA: impeller-motor air direction for air entry to premises.
• Actuator with 24 V DC supply voltage.