Sodeca CMRS-X Belt driven fan
Belt driven fans, equipped with an electric motor, a standardised set of pulleys, belts and guards according to ISO-13857
Motor mounted on pedestal with motor slide base.
Sheet steel casing.
Working temperature: -25 ºC +50 ºC.
Please indicate in the quote form the model and other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials...).
Fan:
- Sheet steel casing.
- With inspection and cleaning hatch from size 560 and up.
- Backward curved impeller made of highly robust sheet steel, specially designed for clean air.
- Motor mounted on pedestal with motor slide base.
- Belt driven fan.
- Maximum temperature of air to be carried: -25 ºC +90 ºC.
- Sizes larger than 1600 will be supplied with split casing to facilitate transport.
- Casing continuously welded from size 800 and up.
Motor:
- Three-phase with IE4 efficiency for power from 75 kW to 200 kW, except 2-speed and 8-pole.
- Class F motors with ball bearings and IP55 protection.
- Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
- Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
- Working temperature: -25 ºC +50 ºC.
Finish:
Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
- Stainless steel fan.
- Special windings for different voltages.
- Fan prepared to transport air up to +300 ºC.
- ATEX certified Category 2.
