Sodeca CAAE single inlet centrifugal fan
Extremely robust high pressure and single inlet centrifugal fans with sheet steel casing and impeller
All casings continuously welded.
Class F motors with ball bearings and IP55 protection.
Fan impeller mounted directly on the motor shaft.
Please indicate in the quote form the model and other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials...).
Fan:
- Fan impeller mounted directly on the motor shaft.
- Sheet steel casing.
- Forward curved impeller made of highly robust sheet steel, specially designed for clean and dusty air.
- All casings continuously welded.
- With inspection and cleaning hatch from size 560 and up.
- Maximum temperature of air to be carried: -25 ºC +90 ºC.
Motor:
- Class F motors with ball bearings and IP55 protection.
- Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
- Working temperature: -25 ºC +50 ºC.
- Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
Finish:
Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
- Special windings for different voltages.
- Fan prepared to transport air up to +150 ºC.
- Special executions for temperatures + 300 ºC.
- Stainless steel fan.
- ATEX certified Category 2.
- Other arrangements like ARR.8.
