Sodeca HTMV axial extract fans
Roof mounted axial extract fans with vertical air outlet, designed for extracting large air volumes in industrial or similar premises.
Class F motors with ball bearings and IP55 protection
Adjustable cast aluminum impeller.
Protection grid against contacts according to UNE-EN ISO 12499.
Please indicate in the quote form the model and other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials...).
Fan:
- Protection grid against contacts according to UNE-EN ISO 12499.
- Support base in galvanised steel sheet and anti-corrosive treatment.
- Airflow direction from motor to impeller.
- Adjustable cast aluminum impeller.
- Non-return damper in aluminum sheet to prevent the entry of water when the fan is not running.
Motor:
- Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
- Class F motors with ball bearings and IP55 protection.
- Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
- Working temperature: -25 ºC +40 ºC.
Finish:
Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
- Fans with 2 speed motor.
- 2 and 8 pole fans according to diameter.
- Hot dip galvanised steel construction.
- Special windings for different voltages and frequencies.
- Total stainless steel construction.
