Sodeca CMRS Medium pressure centrifugal fan
Very robust single inlet medium pressure centrifugal fans, equipped with a backward curved impeller
Sheet steel casing.
Casing continuously welded.
Class F motors with ball bearings and IP55 protection.
Please indicate in the quote form the model and other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials...).
Fan:
- Fan impeller mounted directly on the motor shaft.
- Backward curved impeller made of highly robust sheet steel, specially designed for clean air.
- Sheet steel casing.
- With inspection and cleaning hatch from size 630 and up.
- Casing continuously welded.
- Maximum temperature of air to be carried: -25 ºC +90 ºC.
Motor:
- Three-phase with IE4 efficiency for power from 75 kW to 200 kW, except 2-speed and 8-pole.
- Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
- Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
- Class F motors with ball bearings and IP55 protection.
- Working temperature: -25 ºC +50 ºC.
Finish:
Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
- Special windings for different voltages.
- Fan prepared to transport air up to +150 ºC.
- Special executions for temperatures + 300 ºC.
- Stainless steel fan.
- ATEX certified Category 2.
- Other arrangements like ARR.8.
