Sodeca CASB centrifugal fans
Extremely robust high pressure and single inlet centrifugal fans with sheet steel casing and impeller
Class F motors with ball bearings and IP55 protection.
Sheet steel casing.
Casing continuously welded from size 710 and up.
Please indicate in the quote form the model and other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials...).
Fan:
- Backward curved impeller made of highly robust sheet steel, specially designed for dusty air.
- Fan impeller mounted directly on the motor shaft.
- Casing continuously welded from size 710 and up.
- Sheet steel casing.
- With inspection and cleaning hatch from size 560 and up.
- Sizes larger than 1600 will be supplied with split casing to facilitate transport.
- Maximum temperature of air to be carried: -25 ºC +90 ºC.
Motor:
- Class F motors with ball bearings and IP55 protection.
- Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
- Working temperature: -25 ºC +50 ºC.
- Three-phase with IE4 efficiency for power from 75 kW to 200 kW, except 2-speed and 8-pole.
- Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
Finish:
Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
- Stainless steel fan.
- Fan prepared to transport air up to +150 ºC.
- Other arrangements like ARR.8.
- Special executions for temperatures + 300 ºC.
- Special windings for different voltages.
- ATEX certified Category 2.
