Sodeca CAMD centrifugal fan
Extremely robust medium pressure and single inlet centrifugal fans with sheet steel casing and impeller
Fan impeller mounted directly on the motor shaft.
Casing continuously welded from size 710 and up.
Class F motors with ball bearings and IP55 protection.
Please indicate in the quote form the model and other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials...).
Fan:
- Casing continuously welded from size 710 and up.
- Fan impeller mounted directly on the motor shaft.
- Backward curved impeller made of very robust sheet steel, specially designed for air with a lot of dust.
- With inspection and cleaning hatch from size 560 and up.
- Casing continuously welded from size 710 and up.
- Sizes larger than 1600 will be supplied with split casing to facilitate transport.
- Sheet steel casing.
- Maximum temperature of air to be carried: -25 ºC +90 ºC.
Motor:
- Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
- Class F motors with ball bearings and IP55 protection.
- Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
- Three-phase with IE4 efficiency for power from 75 kW to 200 kW, except 2-speed and 8-pole.
- Working temperature: -25 ºC +50 ºC.
Finish:
Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
- Fan prepared to transport air up to +150 ºC.
- Special windings for different voltages.
- Stainless steel fan.
- Special executions for temperatures + 300 ºC.
- ATEX certified Category 2.
- Other arrangements like ARR.8.
