Sodeca HCT tubular axial fan
Tubular wall mounted fans. PL version fitted with a plastic impeller and AL version with an aluminium impeller.
Class F motors with ball bearings. IP55 protection
Tubular casing in sheet steel with external terminal box.
Please specify the model and any other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials, etc.) in the quote request form.
Motor:
- Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
- Working temperature: -25 ºC +50 ºC.
- Class F motors with ball bearings. IP55 protection. Except single-phase models from size 45 to size 56, with IP54 protection. 1 or 2 speeds depending on model.
- Single-phase 230 V 50 Hz and three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
Fan:
- Tubular casing in sheet steel with external terminal box.
- Airflow direction from motor to impeller.
- PL version impellers in fibreglass reinforced polyamide-6 and AL version in cast aluminium. Models 40-2T and 45-2T only in AL version.
Finish:
Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
- ATEX certified Category 2.
- Airflow direction from impeller to motor.
- 100% reversible impellers.
- Special windings for different voltages.
