Dosatron D07RE5 EPDM 0.8-5% 0.7 m³/h - Dosing pump
Compact pump that uses water flow and hydraulic pressure to inject liquids, such as vitamins and minerals, into water pipes.
Self-suction and proportional and continuous injection
Continuously adjustable dosage
Max water flow rate: 5 L/u, 0.7 m³/hour
The Dosatron pump is supplied with wall mounting, suction hose with filter and operating instructions.
It is very reliable and does not require electricity.
Tips for using the Dosatron D07RE5 EPDM pump
- Not suitable for sand, manganese, iron and calcareous water.
- Dosatron pumps are suitable for acidic concentrates (organic <25% - inorganic 0% and hydrogen peroxide <18%), oil and pesticides.
- To set the desired percentage, match the upper end of the adjustment ring with the corresponding position on the pump. graduation.
Material characteristics:
- Pump housing: Polypropylene, EPDM
- Motor suction element: Polypropylene, stainless steel, Teflon, EPDM
- Dosing element: Polypropylene, polyethylene, Hastelloy (the spring for the check valve)
- Suction hose: PVC
- Seals: EPDM
Technical characteristics of the Dosatron D07RE5 EPDM pump:
- Connection: 3/4” exterior thread
- Dosage: 0.8 – 5.5%
- Max. flow: 0.7 m³/uur
- Operating temperature: 5°C – 40°C
- Operating pressure: 0.3 – 6 bar
- Max. suction height/length: 4 meters
- Max. viscosity: 400 cPs at 20°C
- Weight: 1kg
