Sodeca WALL/AXIAL Dynamic wall mount axial extract fan

Indique en el formulario de presupuesto el modelo y otras informaciones que puedan ayudar a proporcionarle el producto más adecuado (caudal, trifásico/monofásico, número de polos, medidas, materiales ... ).

Technical datasheet

Fan:

• Fibreglass reinforced polyamide-6 impeller.
• Wall fixing flange for correct and easy installation.
• Support frame in galvanised sheet steel.
• On models 71, the protective grille is supplied as an accessory.
• Protection grid against contacts according to UNE-EN ISO 12499.
• Airflow direction from motor to impeller.

Extruded aluminum hatch:

• Thermal resistance of the assembly less than 0.89 W/m²·K.
• Designed to ensure watertightness.
• Aluminum profile with thermal bridge break.
• An extremely robust structure that is able to withstand severe weather changes.
• Central ceiling and structure equipped with high performance thermal insulation.
• Position indicators in both positions (open and closed).
• Upper and lower opening mounting versions.
• Manual opening system.
• Airborne acoustic insulation value according to UNE-EN ISO 10140-2: Rw = 27 (0;-2) dB.

Motor:

• Working temperature: -25 ºC +60 ºC.
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection.
• Three-phase 230/400 V 50 Hz.

Actuator:

• Working temperature: -25 ºC +60 ºC.
• Reliability greater than 20,000 dual cycles.
• Supply voltage at 230 V AC 50/60 Hz.
• Protection at the leading edge when closing the hatch.
• The stop in the closed position is regulated by an electronic limit switch.

Hatch finish:

• Anti-corrosive in extruded aluminum.
• RAL 7024M supplied as standard. Any other RAL can be supplied on demand.

On request:

• AA: impeller-motor air direction for air entry to premises.
• Actuator with 24 V DC supply voltage.