Sodeca CASB-X Belt driven high pressure fan
Fans equipped with an electric motor, a set of pulleys, belts and standardised guards
Sheet steel casing.
Casing continuously welded from size 710 and up.
Class F motors with ball bearings and IP55 protection.
Please indicate in the quote form the model and other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials...).
Fan:
- Motor mounted on pedestal with motor slide base.
- With inspection and cleaning hatch from size 560 and up.
- Sheet steel casing.
- Sizes larger than 1600 will be supplied with split casing to facilitate transport.
- Backward curved impeller made of highly robust sheet steel, specially designed for dusty air.
- Casing continuously welded from size 710 and up.
- Maximum temperature of air to be carried: -25 ºC +90 ºC.
Motor:
- Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
- Class F motors with ball bearings and IP55 protection.
- Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
- Three-phase with IE4 efficiency for power from 75 kW to 200 kW, except 2-speed and 8-pole.
- Working temperature: -25 ºC +50 ºC.
Finish:
Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
- ATEX certified Category 2.
- Fan prepared to transport air up to +300 ºC.
- Special windings for different voltages.
- Stainless steel fan.
