Sodeca CAMD-X Belt driven medium pressure fan
Fan equipped with an electric motor, a set of pulleys, belts and standardised guards
Motor mounted on pedestal with motor slide base.
Casing continuously welded from size 710 and up.
Class F motors with ball bearings and IP55 protection.
Please indicate in the quote form the model and other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials...).
Fan:
- Motor mounted on pedestal with motor slide base.
- Sizes larger than 1600 will be supplied with split casing to facilitate transport.
- Sheet steel casing.
- Backward curved impeller made of very robust sheet steel, specially designed for air with a lot of dust.
- With inspection and cleaning hatch from size 560 and up.
- Casing continuously welded from size 710 and up.
- Maximum temperature of air to be carried: -25 ºC +90 ºC.
Motor:
- Three-phase with IE4 efficiency for power from 75 kW to 200 kW, except 2-speed and 8-pole.
- Class F motors with ball bearings and IP55 protection.
- Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
- Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
- Working temperature: -25 ºC +50 ºC.
Finish:
Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
- ATEX certified Category 2.
- Special windings for different voltages.
- Stainless steel fan.
- Fan prepared to transport air up to +300 ºC.
