Sodeca CAAF centrifugal fan
High pressure and single inlet centrifugal fans with sheet steel casing and impeller
Sheet steel casing.
All casings continuously welded.
Three-phase 230/400 V 50 Hz and 400/690 V 50 Hz
Please indicate in the quote form the model and other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials...).
Motor:
- Class F motors with ball bearings and IP55 protection.
- Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
- Working temperature: -25 ºC +50 ºC.
- Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
Fan:
- Forward curved impeller made of highly robust sheet steel, specially designed for clean and dusty air.
- All casings continuously welded.
- Fan impeller mounted directly on the motor shaft.
- Sheet steel casing.
- With inspection and cleaning hatch from size 560 and up.
- Maximum temperature of air to be carried: -25 ºC +90 ºC.
Finish:
Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
- Stainless steel fan.
- Special windings for different voltages.
- ATEX certified Category 2.
- Fan prepared to transport air up to +150 ºC.
- Special executions for temperatures + 300 ºC.
- Other arrangements like ARR.8.
