Sodeca CAAB centrifugal fan
Extremely robust high pressure and single inlet centrifugal fans with sheet steel casing and impeller
All casings continuously welded.
Fan impeller mounted directly on the motor shaft.
Three-phase 230/400 V 50 Hz and 400/690 V 50 Hz
Please indicate in the quote form the model and other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials...).
Fan:
- Fan impeller mounted directly on the motor shaft.
- Backward curved impeller made of highly robust sheet steel, specially designed for clean and dusty air.
- Sheet steel casing.
- All casings continuously welded.
- With inspection and cleaning hatch from size 560 and up.
- Maximum temperature of air to be carried: -25 ºC +90 ºC.
Motor:
- Class F motors with ball bearings and IP55 protection.
- Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
- Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
- Three-phase with IE4 efficiency for power from 75 kW to 200 kW, except 2-speed and 8-pole.
- Working temperature: -25 ºC +50 ºC.
Finish:
Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
- ATEX certified Category 2.
- Special windings for different voltages.
- Special executions for temperatures + 300 ºC.
- Fan prepared to transport air up to +150 ºC.
- Stainless steel fan.
- Other arrangements like ARR.8.
